Advance-adapters 50-0434 Manuel d'utilisateur télécharger pdf

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of the

components will void any possible warranty or return privileges. If you do not fully understand the modifications or changes that will be required to complete

your conversion, we strongly recommend that you contact our sales department for more information. This Instruction Sheet is only to be used for the assembly

of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque vales, wiring diagrams and

other related equipment. These manuals are normally available at automotive dealerships and parts stores.

ADVANCE ADAPTERS, INC. P/N: 50-0434

P.O. Box 247, 4320 Aerotech Center Way New Item: (01/07)

Paso Robles, CA 93447 PAGE: 1 OF 4

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 03-28-12

KIT CONSISTS OF:

No. Qty. Part No. Description

GM 4L60E 4WD HEX BOLT PATTERN TO JEEP

NP231 T/C (27-SPLINES) UP TO 1994

1. 1 51-0405 CASTING

2. 1 51-9111 CASTING

3. 1 716074 RELUCTOR RING

4. 1 716079 PLUG

5. 1 716202 NP231 INPUT SHAFT

6. 1 *716325A NEEDLE BEARING

7. 1 716511 "O"-RING

8. 1 716517 GASKET

9. 1 716757 SEAL

10. 1 716760 NP231 INPUT SEAL

11. 4 720011 10mm X 1.5 NUT

12. 4 720061 10mm-1.5 X 50mm STUD BOLTS

13. 1 300619 SENSOR

* INSTALLED AT ADVANCE ADAPTERS

INSTALLATION INSTRUCTIONS:

This kit is designed to use a stock 4L60E 4x4 hex bolt pattern transmission to a New Process transfer case. If you do not

have the 4x4 version of the 4L60E, you will have to purchase a new GM output shaft.

When installing the new transfer case adapter, make sure that the transfer case input sleeve and the output shaft do not bottom

out. We have found on occasion that a transmission output shaft may be slightly longer than we have allowed for; and when

coupling into the transfer case, we find a small amount of interference. The adapter housing and shaft must be assembled

to the back of the transmission without interference. DO NOT FORCE THE NEW TAILHOUSING ONTO THE

TRANSMISSION. If assistance is needed, please feel free to call us on our toll free number, 1-800 350-2223.

When assembling the adapter housing to the transmission case, we have provided you with a new square type O- ring seal

to prevent fluid leakage. This O-ring seal is a stock GM item.

This adapter can be used on either Jeep Wranglers 1987 & newer or Jeep Cherokees 1984 & newer. The only difference

is the transfer case shifter linkage.

The adapter is 4.10" thick and will provide an overall transmission assembly length of 25-7/8".

OPTIONAL ITEMS:

It is possible to utilize the stock 700R-4

rubber mount by fabricating a plate to

transfer the bolt pattern from our

casting to your stock mount. If you

are looking for another option we

recommend our 716055 transmission

mount. This mount is sold separately.

1 2 3 4

Résumé du contenu

Page 1 - No. Qty. Part No. Description

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of thecomp

Page 2

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of thecomp

Page 3

ADVANCE ADAPTERS, INC. P/N: 50-0434P. O. Box 247, 4320 Aerotech Center Way New Item: (01/07)Paso Robles, CA 93447 PAGE: 3 OF 4Telephone: (800) 350

Page 4

ADVANCE ADAPTERS, INC. P/N: 50-0434P. O. Box 247, 4320 Aerotech Center Way New Item: (01/07)Paso Robles, CA 93447 PAGE: 4 of 4Telephone: (800) 350

Commentaires sur ces manuels

Pas de commentaire

Advance-adapters 50-0434 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Advance-adapters 50-0434. Advance Adapters 50-0434 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Advance-adapters 50-0434