Advance-adapters 712506 Manuel d'utilisateur télécharger pdf

ADVANCE ADAPTERS INC. P/N: 712506

P.O. Box 247, 4320 Aerotech Center Way

Paso Robles, CA 93447 PAGE 1 OF 2

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 01-23-13

KIT CONSISTS OF:

No. Qty Part No. Description

OPTIONAL ITEMS:

Qty Part No. Description

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void

any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that

you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service

manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships

and parts stores.

1 716176 CLUTCH REL. ARM

INSTALLATION INSTRUCTIONS:

These transmissions were normally used with the Buick V6 Jeeps between the years of 1966 through 1971. When used

with a V6 engine, some models had the adapter molded into the bellhousing. Quite often, customers will find these

transmissions and need to adapt them to the Chevy and Ford bellhousings. The original transmission must have the long

snout bearing retainer. The T86 and T14 transmissions both have a pilot diameter that is the same as the Chevy

transmissions which is .590". The transmissions can be identified by the square bolt pattern. The original input shaft

should stick out approximately 9" in order to work with the new Advance Adapter kit.

1. Install pilot bushing into the engine crank shaft.

2. Remove the bearing retainer from the front of the 3 speed transmission and cut the snout off as illustrated to an

overall length of 1-3/4". Remove the seal and install the new seal provided with the kit. The seal must have the

open side towards the transmission.

3. The following Chevy parts will be necessary:

Clutch Release Bearing

Clutch Release Lever

Pressure Plate

Clutch Disc with 1-1/8"-10

Flywheel

Bellhousing with small index

4. Bolt the new bearing retainer to the front of the adapter housing using the 4 bolts supplied.

5. Bolt the adapter plate to the new bellhousing.

6. Bolt the transmission to the adapter plate using the new bolts supplied.

JEEP T14 & T86 3 SPEED TRANSMISSIONS

TO CHEVY & BUICK ENGINES

1 1 711505A T86/T14-1" SPACER CASTING UNIVERSAL

2 1 711509 T15-CHEVY CASTING

3 1 716046 RETAINER (AA-OD)

4 1 716170 BUSHING (STK. CHEVY) .590"

5 1 716706 SEAL-T90

6 4 723119 S.H.C.S. 5/16"-18 X 1-1/4"

7 4 724359 H.H.C.S. GRD8 7/16"-14 X 2-1/2" (6855)

1 2

TO CHEVY & BUICK ENGINES 1

Résumé du contenu

Page 1 - TO CHEVY & BUICK ENGINES

ADVANCE ADAPTERS INC. P/N: 712506P.O. Box 247, 4320 Aerotech Center WayPaso Robles, CA 93447 PAGE 1 OF 2Telephone: (800) 350-2223 Fax: (805) 238-420

Page 2

JEEP T14 & T86 3 SPEED TRANSMISSIONSTO CHEVY & BUICK ENGINESADVANCE ADAPTERS INC. P/N: 712506P.O. Box 247, 4320 Aerotech Center WayPaso Roble

Commentaires sur ces manuels

Pas de commentaire

Advance-adapters 712506 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Advance-adapters 712506. Advance Adapters 712506 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Advance-adapters 712506