Advance-adapters 50-5707 Manuel d'utilisateur télécharger pdf

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the

components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,

we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter

components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.

These manuals are normally available at automotive dealerships and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

ADVANCE ADAPTERS INC. P/N: 50-5707

P.O. Box 247, 4320 Aerotech Center Way New Item: (02/96)

Paso Robles, CA 93447 PAGE 1 OF 2

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 07-18-13

1. 1 51-5707 ADAPTER PLATE

2. 1 52-5707 FEMALE SPLINNED COUPLER SLEEVE

3. 1 716711 NATIONAL SEAL #1175 (Tailhousing replacement seal)

4. 1 716712 NATIONAL SEAL #710418 (Install in adapter plate)

5. 2 720030 10mm X 1.25 X 30mm LONG (Bottom bolts to gear driven box)

6. 4 720087 10mm X 1.25 X 40mm LONG (Top 4 bolts to the gear driven box)

NOTES

1. This adapter kit is only compatible with 23 tooth input gears. If you are attempting to use a 21 spline transfer case,

you will need to use kit 50-5708 or change the input gear to a Toyota input gear (Part #36212-35020). The approximate

cost is $175.00 for this new input shaft.

2. The adapter kit is only compatible with a transfer case that is top shifted. If the transfer case does not have a shifter

included, you must make the necessary changes to have the transfer case accept a top shifter.

3. The new sleeve will need to be installed onto the 5 speed output shaft as illustrated in the drawing. It would be a good

idea to inspect and check the fit of the new sleeve onto the transfer case 23 spline input shaft. We have made the

spline engagement to be more than a slip fit similar to the original sleeve used in the Toyota chain driven transfer case

design.

4. This adapter can be used for either the installation of a Crawler Dual Transfer Case application or simply changing

the chain-driven transfer case to a gear-driven design.

5. The adapter plate has been made with a thin design so that possible driveline modifications could be very minimal if

any at all.

TOYOTA R150F 5 SPEED (V6 & TURBO CHARGE)

TO GEAR DRIVEN 23 SPL.TOYOTA 4WD T/C

1 2

KIT CONSISTS OF: 1

Résumé du contenu

Page 1 - KIT CONSISTS OF:

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of thecompon

Page 2

TOYOTA R150F 5 SPEED (V6 & TURBO CHARGE)TO GEAR DRIVEN 23 SPL.TOYOTA 4WD T/CSPECIAL NOTE: The components packaged in this kit have been assembled

Commentaires sur ces manuels

Pas de commentaire

Advance-adapters 50-5707 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Advance-adapters 50-5707. Advance Adapters 50-5707 User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Advance-adapters 50-5707