Advance-adapters 50-9808 Manuel d'utilisateur télécharger pdf

KIT CONSISTS OF:

No. Qty Part No. Description

ADVANCE ADAPTERS INC. P/N: 50-9808

P.O. Box 247, 4320 Aerotech Center Way New Item: (08/94)

Paso Robles, CA 93447 PAGE 1 OF 3

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 01-15-08

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will

void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend

that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a

service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive

dealerships and parts stores.

1. 1 51-9808 CASTING 5.250" LONG

2. 1 52-9700 SPUD SHAFT - SM465/JEEP NP T/C LONG 23 SPL. (Ref: 711397)

3. 1 716515 GASKET

4. 1 716517 GASKET

5. 1 716729 NATIONAL SEAL

6. 1 723701 3/8"-16 HEX NUTS

7. 14 723704 3/8" LOCK WASHER PLT.

8. 1 723711 STUD BOLT 3/8"-16 x 2"

9. 12 723723 H.H.C.S. 3/8"-16 x 1-1/2"

10. 1 723740 S.H.C.S. 3/8"-16 x 1-1/2"

11. 1 JP001 JEEP INSTRUCTION MANUAL

GM TRUCK 4WD 4SP MODEL SM465 10 SPLINE

JEEP NP231 TRANSFER CASE 23T (Short Design)

PLEASE NOTE THE FOLLOWING:

This adapter kit has an overall length of 17-1/4". The length will be very compatible when replacing the AX15 5 speed

transmission. When using this transmission with the Jeep 6 cylinder, you will need to use the Advance Adapters bellhousing

No. 712571. This adapter could be used with both V8 and Straight 6 engine conversions and will offer the maximum

driveshaft length capable in the Wrangler conversion. DO NOT USE THIS KIT FOR REPLACEMENT OF THE

PEUGEOT 5 SPEED unless you purchase #716053 23T input gear replacement for the 21T transfer case.

This kit fits both New Process transfer cases with either a long or short T/C input stickout. If your vehicle

was equipped with a long T/C input stickout (replacing a 999/904 transmission) an additional spacer adapter

plate is necessary part number AS-8610. This plate will eliminate a chance of assembly pre-load. Please call

for pricing on this plate, when replacing the Jeep automatics.

1 2 3

KIT CONSISTS OF: 1

Résumé du contenu

Page 1 - KIT CONSISTS OF:

KIT CONSISTS OF:No. Qty Part No. DescriptionADVANCE ADAPTERS INC. P/N: 50-9808P.O. Box 247, 4320 Aerotech Center Way New Item: (08/94)Paso Robles, C

Page 2

GM TRUCK 4WD 4SP MODEL SM465 10 SPLINEJEEP NP231 TRANSFER CASE 23T (Short Design)ADVANCE ADAPTERS INC. P/N: 50-9808P.O. Box 247, 4320 Aerotech Center

Page 3

51-9808DVANCEDAPTERSGM TRUCK 4WD 4SP MODEL SM465 10 SPLINEJEEP NP231 TRANSFER CASE 23T (Short Design)ADVANCE ADAPTERS INC. P/N: 50-9808P.O. Box 247,

Commentaires sur ces manuels

Pas de commentaire

Advance-adapters 50-9808 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Advance-adapters 50-9808. Advance Adapters 50-9808 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Advance-adapters 50-9808